THÔNG SỐ
Product SKUs | |
MBD-X10DAi | X10DAi |
Physical Stats | |
Form Factor | E-ATX |
Dimensions | 12" x 13" (30.5cm x 33.0cm) |
Processor/Cache | |
CPU | Intel® Xeon® processor E5-2600 v3, Intel® Xeon® processor E5-2600 v4. |
Dual Socket LGA-2011-3 (Socket R3) supported, CPU TDP support Up to 160W TDP, 1 QPI up to 9.6GT/s | |
Cores / Cache | Up to 22 cores † / Up to 55MB† cache |
Note | † BIOS version 2.0 or above is required |
Note | ** Motherboard supports this maximum TDP. Please verify your system can thermally support. |
System Memory | |
Memory Capacity | 1TB 3DS ECC/non-ECC RDIMM, DDR4-2400MHzUp to 2TB 3DS ECC LRDIMM, DDR4-2400MHz, in 16 DIMM slots |
Memory Type | 2400/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
DIMM Sizes | RDIMM: 4GB, 8GB, 16GB, 32GB |
LRDIMM: 32GB, 64GB | |
3DS LRDIMM: 128GB | |
Memory Voltage | 1.2V |
Error Detection | Corrects single-bit errors |
On-Board Devices | |
Chipset | Intel® C612 |
SATA | Intel® C612 controller for 10 SATA3 (6 Gbps) ports; RAID 0,1,5,10 |
AHCI SATA | SATA3 (6Gbps); RAID 0, 1, 5, 10 |
SCU SATA | SATA3 (6Gbps); RAID 0, 1, 5, 10 |
Network Controllers | Dual LAN with Intel® i210 Gigabit Ethernet Controller |
Audio | RealTek ALC1150 HD Audio |
Input / Output | |
SATA | 10 SATA3 (6Gbps) port |
LAN | 2 RJ45 Gigabit Ethernet LAN ports |
USB | 5 USB 2.0 ports (2 rear + 2 via headers + 1 Type A) |
6 USB 3.0 ports (4 rear + 2 via headers) | |
TPM | 1 TPM Header |
Expansion Slots | |
PCI-E | 3 PCI-E 3.0 x16, |
2 PCI-E 3.0 x8 | |
1 PCI-E 2.0 x4 (in x8 slot) | |
System BIOS | |
BIOS Type | 128Mb SPI Flash EEPROM with AMI BIOS |
BIOS Features | Plug and Play (PnP) |
PCI 2.3 | |
ACPI 1.0 / 2.0 / 3.0 / 4.0 | |
SMBIOS 2.7.1 | |
UEFI 2.3.1 | |
Management | |
Software | NMI, SuperDoctor® 5, Watchdog |
Power Configurations | ACPI Power Management |
Power-on mode for AC power recovery | |
PC Health Monitoring | |
Voltage | +12V, +3.3V, +5V, +5V standby, 3.3V standby, 6 Phase-switching voltage regulator |
FAN | 8x 4-pin fan headers (up to 8 fans), 8x fans with tachometer monitoring, Pulse Width Modulated (PWM) fan connectors, Status monitoring for speed control |
Temperature | CPU thermal trip support, Monitoring for CPU and chassis environment, Thermal Monitor 2 (TM2) support, PECI, Thermal Control for 8 Fan Connectors |
LED | CPU / System Overheat LED, Suspend static indicator LED, UID/Remote UID |
Other Features | Chassis intrusion detection, Chassis intrusion header, RoHS, SDDC |
Operating Environment | |
Operating Temperature Range | 10°C - 35°C (50°F - 95°F) |
Non-Operating Temperature Range | -40°C - 70°C (-40°F - 158°F) |
Operating Relative Humidity Range | 8% - 90% (non-condensing) |
Non-Operating Relative Humidity Range | 10% ~ 95% (non-condensing) |